TR-56S Series

Inquiry Next
Product Description
Perfect Structure Design!!
High Speed without Vibration!!
  • All structural parts are manufactured from Meehanite cast iron with thorough stress relief. This features outstanding of structure without deformation.
  • Three axes slideways are equipped with HIWIN roller type linear guide ways.
  • Traveling column, oversized base and light moving parts permit high speed travel without vibration.
  • Stable automatic pallet change. Fully traveling column on 3 axes. One-piece constructed oversized base provides extra large span between slideways, Ensuring extremely smooth movement of Y-axis. X-axis acceleration / deceleration is over 1G without vibration.
  • The increased height of moving parts shortens the distance from the spindle nose to blocks on 3 axes linear ways. This results in optimal rigidity during cutting.
Product Feature
Precise, Fast Pallet Change
  • The high precision pallet change is achieved through a 3-piece coupling positioning mechanism. 
  • The pallet change is fully electric driven combined with cam indexing. Pallet change is quickly accomplished in only 4 seconds with maximum stability.
  • The machine is provided with a rotary cylinder. Each working area can be equipped with one set of air system (hydraulic system optional) for mounting jig.

High Speed, High Precision Spindle

  • Choice of BT#30 and BT#40 spindles. Each model is mounted with a direct-drive spindle, featuring low noise, low vibration and high performance. 
  • Choice of spindle speed from 10,000 rpm to 24,000 rpm to meet various cutting requirements.
  • Available to use spindle motor with extra low inertia for minimum acceleration / deceleration time. Spindle running from 0 to 15,000 rpm only needs 0.65 seconds, significantly increasing tapping efficiency. 
    High Speed, High Precision Spindle

Efficient Magazine

  • Standard loading capacity of the magazine is 24 tools. For BT#30 tool shank, the loading capacity is 20 tools. The use of hydraulic tool releasing system features high stability. Tool change is quickly accomplished with smooth tool change motion. 

Control Panel User-friendly
Operational Control!

  • The control panel design meets human engineering theorem and CE regulations, and is easy to operate.
  • A separated control panel is provided between working area and magazine operation area for added convenience of operation.

Standard Fully-sealed Electric Cabinet

  • In compliance with CE standards, the electric cabinet is equipped with rubber fitting around the opening such design ensures consistent conditions within the electric cabinet so that extend lifetime of the electric components.
Standard Accessories
  • Spindle air blow device.
  • Double PL lights for working area and parts change area.
  • Tool coolant system and big flow chip flushing system.
  • Pressure detected automatic lubrication system and precision lubrication oil filter.
  • LED high brightness dual-color alarm light.
  • One-piece double layer heat isolated electric cabinet includes heat exchanger.
  • Tool kits and tools.
  • Table with twin working area.
  • Pneumatic type table distributor. Each working area is equipped with one set of air circuit.
Optional Accessories
  • High speed spindle BT#40, 15000 rpm. 
    BT#30, 24000 rpm.
  • Extra low inertia spindle motor.
  • Increase motor power.
  • High pressure coolant through spindle.(20 BAR)
  • Automatic tool length measurement with breaking detection.
  • 4th axis rotary table (for both working tables also).
  • Thermal compensation system.
  • Transformer, regulator.
Product Specification
Machine Specifications
  Model TR-56S TR-563S
Axis X-Travel mm 560
Y-Travel mm 400
Z-Travel mm 400
Spindle Nose to Working Table mm 150 ~ 550
Working Table Table Area mm 600x425x2PCS
Max. Load kgs 200x2PCS
T Slots mm M12
Spindle Spindle Speed rpm 8000 10000
Max. Tapping Speed rpm 4000 5000
Spindle Taper   7/24 NO 40 7/24 NO 30
Transmission   Direct Drive
Traverse Rapid Traverse (G00) m/min 48 / 48 / 48
Machining Speed (G01) mm/min 10000
Magazine Tool Shank   BT# 40 BT# 30
ATC   Arm-type
Magazine Capacity   24+1 20+1
Max. Tool Length mm 250 200
Max. Tool Diameter mm 80 80
Max. Tool Weight kgs 4 3
Tool Change Time TOOL TO TOOL sec 2 1.8
CHIP TO CHIP sec 5.5 5.2
Motor X-Axis kw 1.5(Mitsubishi) / 1.8(Fanuc)
Y-Axis kw 1.5(Mitsubishi) / 1.8(Fanuc)
Z-Axis kw 3.0(Mitsubishi) / 3.0(Fanuc)
Spindle kw 7.5 / 5.5 3.7 / 2.2
Dimensions W x D x H mm 2320x3328x2617 2185x3328x2617
N.W. kgs 5500 5300
NC Specifications
　 Mitsubishi　 Fanuc　
　 M80-VB M80-VA M830S 0i-MF(P3) 0i-MF(P1)
Max. Controlled Axes 9 11 16 6 9
Max. Simultaneous Axes 4 4 4 4 4
Program Storage Length 512K 512K 512K 512K 512K
Macro Variables Common 700 700 700 700 700
Tool Offset Sets 400 400 400 400 400
Simplified programming function ○ ○
Display 8.4" TFT LCD 10.4" TFT LCD 8.4" TFT LCD
Display language selection  ○ ○
Memory Card Front-Loading ○ ○
Ethernet ○ ○
High Speed And Accuracy Machining Code SSS G05.1 Q1
Working Table Size

Dimensions
T-solt Dimension

Machine Dimension
  A B C
TR-563S 2185 3328 2617
TR-56S 2320 3328 2617
* All specifications, dimensions and design characteristics are subject to change without prior notice.
Back to List