#40 NEW GENERATION Series

Product Description
  • Standard spindle speed
    BT#40 60~8,000 min-1
  • Optional spindle speed
    BT#40 10,000 ; 12,000 ; 15,000 min-1
  • Rigid tapping 4,000 min-1
  • Spindle nose taper BT-40
    3 axes rapid traverse
  • X, Y, Z:48 M/min
  • Fully enclosed heat isolated electric cabinet
  • "Directly coupled spindle drive system"
Product Feature

Y AXIS COVER GUARD

  • Full enclosure design of Y axis to avoid the chips accurnulation.

LINEAR WAYS ON 3 AXES

  • The X, Y, Z-axis sliderways are mounted with precision linear ways, fitted with great span between ways, showing maximum stability during high speed traverse.
    The ball type linear ways feature low friction coefficient and high positioning accuracy.

HIGH EFFICIENCY CHIP FLUSHING SYSTEM AND EXTRA WIDE SPAN

  • Back-Flow base design of chip removal angle provides ultimate chip removing capabilities.
  • With extra wide span, superior stability.

COLUMN BASE INCREASED

  • With bigger span offer higher rigidity and cutting stability.

DIRECT DRIVE SPINDLE

  • Direct drive spindle, without noise, vibration and backlash.

MOTOR OF Y AXIS

  • Y axis motor is mounted in front of machine to reduce the length of y axis ballscrew, and heat difference.
Standard Machine Features
  • Spindle air blow device
  • Work light (PL light)
  • Tool coolant system
  • Leveling bolts and pads
  • Automatic lubrication system
  • Tool kit and tools
  • Dual-color LED alarm light
  • TFT LCD monitor
Optional Accessories
  • 10,000 RPM spindle
  • 12,000 RPM spindle
  • 15,000 RPM spindle
  • Spindle power upgrade
  • Extra low inertia spindle motor
  • High pressure coolant through spindle
  • Automatic tool length measurement with breaking detection
  • Automatic door
  • Transformer; regulator
  • Workpiece air blow system
  • 4th axis
  • 5th axis
Product Specification

 

Machine Specifications

Model TR-51DII TR-51AII TR-60DII TR-60AII TR-70DII TR-70AII
  AXES
X-Travel mm 510 510 600 600 700 700
Y-Travel mm 420 420 420 420 420 420
Z-Travel mm 400 530 400 530 400 530
Table to Spindle Nose mm 150~550 150~680 150~550 150~680 150~550 150~680
  TABLE
Table Size mm 600x450 700X450 800X450
Max.Load kgs 250 250 250
T-Slot mm 14X100X4 14X100X4 14X100X4
  SPINDLE
Speed rpm 8000
Max. Tapping Speed rpm 3000
Taper   7/24 BT#40
Transmission   Direct drive
  FEED RATE
Rapid Speed G00) M/min 48/48/48
Cutting feedrate (G01) mm/min 10000
  MAGAZINE 
Tool Shank   BT#40 BT#40 BT#40
Change Method   Armless Arm Armless Arm Armless Arm
Capacity   14 24+1 14 24+1 14 24+1
Max. Length mm 300 300 300 300 300 300
Max. Dia. mm 100 80 100 80 100 80
Max. Tool Weight kgs 3 4 3 4 3 4
Time (T to T) sec 1.8 1.7 1.8 1.7 1.8 1.7
Time (C to C) sec 2.4 2.4 2.4 2.4 2.4 2.4
  MOTOR
X-Axis kw 1.0(Mitsubishi) / 1.2(Fanuc)
Y-Axis kw 1.5(Mitsubishi) / 1.2(Fanuc)
Z-Axis kw 2.2(Mitsubishi) / 3.0(Fanuc)
Spindle kw 7.5/5.5
  DIMENSIONS
W x D x H cm 167x255x
280
193x257x
280
192x255x
280
197x257x
280
202x255x
280
202x257x
280
Net Weight kgs 3100 3250 3250 3500 3350 3600

NC Specifications
  Mitsubishi  Fanuc 
  M80-VB M80-VA M830S 0i-MF(P3) 0i-MF(P1)
Max. Controlled Axes 9 11 16 6 9
Max. Simultaneous Axes 4 4 4 4 4
Program Storage Length 512K 512K 512K 512K 512K
Macro Variables Common 700 700 700 700 700
Tool Offset Sets 400 400 400 400 400
Simplified programming function
Display 8.4" TFT LCD 10.4" TFT LCD 8.4" TFT LCD
Display language selection 
Memory Card Front-Loading
Ethernet
High Speed And Accuracy Machining Code SSS G05.1 Q1
Dimensions
T-solt Dimension


Machine Dimension
  X Y Z D
TR-51D II 1670 2557 2800 600
TR-51A II 1930 2577 2800 600
TR-60D II 1920 2557 2800 700
TR-60A II 1970 2577 2800 700
TR-70D II 2020 2557 2800 800
TR-70A II 2020 2577 2800 800
* All specifications, dimensions and design characteristics are subject to change without prior notice.