TR-32 5AX Series

Product Description

Perfect Structure Design! High Speed Without Vibration!
Preferred machine for processing few and complex parts.

  • All structural elements are manufactured from Meehanite cast iron with thorough stress relief. Yhis feature creates outstanding structure without deformation.
  • 3-axis slideways are equipped with roller type linear guide ways.
  • Traveling column, oversized base and lightweight moving parts permit high speed travel without vibration. The extra large casting base becomes a raised up platform so moving parts are situated higher and the distance between the spindle nose and the blocks on linear ways are shortened. This design results in optimal rigidity during cutting.
  • The accuracy of the high-performance 5-axis machining center, Ot could reach the request of drilling, tapping, tilt face cutting and irregular surface machining of complex parts.
  • Scales types of X-axis telescopic covers, reduce noise and weight, ensure accuracy at high speed does not affect.

  • Standard spindle speed 8000 rpm (BT#40)
  • Rapid traverse 48/48/48 m/min (X/Y/Z)
  • Inverter type-high speed tool change system 1.8 Sec. (tool to tool)
  • Rigid tapping 3000 rpm
  • Spindle tapper BT#40
  • Direct-drive spindle
Product Feature

Efficient Magazine

  • Standard capacity of the magazine is 30 tools. For BT#40 tool shank.
  • Servo dirve magazine.

Standard Fully-Sealed Electric Cabinet

  • In compliance with CE standards, the electric cabinet is equipped with rubber fitting around the opening such design ensures consistent condition within the electric the lifetime of the electrical components.

Precise, fast rotary Table

  • High rigidity body.
  • Drum brake system, rotating center does not offset during braking.
  • Minimum positioning error.
  • Large hole diameter allows for mounting multi-port oil distributor.
  • Transmitted by specially designed dual lead worm with larger tooth depth and module, the rotary table is excellent for heavy cutting applications.
  • The worm is completely immersed in lubrication fluid for through lubrication and increased service life.
  • Integrated radial and axial bearing.
  • Waterproof design.
Standard Accessories
  • Spindle air blow device.
  • Screw-type chip conveyor.
  • PL lamp.
  • Tool coolant system and high flow chip flushing system.
  • Pressure detected automatic lubrication system and high efficiency oil filter.
  • Dual-color LED alarm light.
  • One-piece dual layer insulated electrical cabinet.
  • Tool kits and tools.
  • TFT LCD monitor.
  • Surround flushing system.
  • Chiller.(spindle speed 10000 rpm, include 10000rpm).
  • Hydraulic unit
  • Scraper type chip conveyor-Rear type 
Optional Accessories
  • Automatic door.
  • Extra low inertia spindle motor.(MITSUBISHI)
  • Motor power upgrade.
  • High speed spindle upgrade.
  • ATLM with breakage detection.
  • Three axes scale.
  • A/C axes scale.
  • Chain or filter type chip conveyor.
  • Water gun.
  • Workpiece air blow system.
  • Oil mist cooling system.
  • Oil skimmer.
  • Mist collect with top side guard.
  • Transformer or voltage regulator.
  • Heat exchanger or electric cabinet air condition.
  • Automatic door
Product Specification
Machine Specifications
  Model TR-32 5AX
Travel X-Travel mm 560
Y-Travel mm 400
Z-Travel mm 400
A-Axis deg. 120° / -30°
C-Axis deg. 360°
Max. swing mm Ø320
Table surface to spindle nose mm 150~550
Spindle nose to tilting center AT 90° mm 150~550
Max. work place size mm Ø260~260
Table Table size mm Ø320
Max. load capacity kgs 100
T Slots mm 12
Max. work area mm 260 x 260L
Spindle Spindle Speed rpm 8000
Max. Tapping Speed rpm 3000
Spindle Taper   7/24 NO 40
Transmission   Direct Drive
Feed Rate Rapid traverse X/Y/Z (G00) m/min 48 / 48 / 48
Rapid C/A axis rpm 25 / 16.6
Cutting(G01) mm/min 8000
Tool Magazine Tool Shank   BT# 40
Pull Studs   P40T-1 MAS403-45°
Magazine Capacity   30+1
ATC Type   Arm
Max. Tool Length mm 275
Max. Tool Diameter mm 80
Max. Tool Weight kgs 5
ATC Time TOOL TO TOOL sec 1.7
CHIP TO CHIP sec 3.2
Motor X-Axis (MITSUBISHI/FANUC) kw 1.5 / 1.8
Y-Axis (MITSUBISHI/FANUC) kw 1.5 / 1.8
Z-Axis (MITSUBISHI/FANUC) kw 3.0 / 3.0
Spindle kw 7.5 / 5.5
Dimensions W x D x H mm 2277X4120X2745
Net weight kgs 5200

  Mitsubishi  Fanuc 
  M80-VB M80-VA M830S 0i-MF(P3) 0i-MF(P1)
Max. Controlled Axes 9 11 16 6 9
Max. Simultaneous Axes 4 4 4 4 4
Program Storage Length 512K 512K 512K 512K 512K
Macro Variables Common 700 700 700 700 700
Tool Offset Sets 400 400 400 400 400
Simplified programming function
Display 8.4" TFT LCD 10.4" TFT LCD 8.4" TFT LCD
Display language selection 
Memory Card Front-Loading
Ethernet
High Speed And Accuracy Machining Code SSS G05.1 Q1

Working Table Size

Dimensions