TAPPING CENTER
  • TR-45 Series
  • TR-51 Series
  • TR-60 Series
  • TR-70 Series
VERTICAL MACHINING CENTER
  • TR-100 Series
VERTICAL MACHINING CENTER WITH AUTOMATIC PLATE CHANGE
  • TR-56S Series
TAPPING CENTER / TR-70 Series
　
　

  • Standard spindle speed 60~8,000 min-1
  • Optional spindle speed 60~12,000, 15,000 min-1
  • Rigid tapping 4,000 min-1
  • Spindle nose taper BT-30, BT-40
  • 3 axes rapid traverse X, Y: 48 M/min, Z: 48 (60) M/min
  • Fully enclosed heat isolated electric cabinet (with heat exchanger)
  • High speed ATC system T.-T.: 1.4 sec (BT-30)
  • Directly coupled spindle drive system
　

.........................................................................................................................................

Machine Specifications

Model

 TR-70 Series
70E 703 70A 703A
AXES
X-Travel mm 700
Y-Travel mm 400
Z-Travel mm 400 350 500 430

Table to Spindle Nose

 mm 150
RAPID TRAVERSE mm 48/48/48 48/48/60 48/48/48 48/48/60
X-axis drive motor kw 1.5 (MELDAS)
Y-axis drive motor kgs 1.5 (MELDAS)
Z-axis drive motor mm 3.0 (MELDAS)
SPINDLE
Transmission   Belt Direct drive Direct drive Direct drive

Spindle taper

   BT-40 BT-30 BT-40 BT-30
Spindle motor output kw 5.5/3.7 3.7/2.2 7.5/5.5 3.7/2.2
Spindle speed min-1 8000
MAGAZINE ARM LESS ARM TYPE
Magazine capacity pcs　 12 12 24+1 20+1
Max. tool weight kgs　 3 2.5 4 3
Max. tool length mm 250 200 250 200
Max. tool diameter mm 100 80 80 63
ATC speed (T-T) sec. 1.8 1.4 1.8 1.2
　　　　　(C-C) sec. 2.5 2.3 2.6 2.1
MACHINE DIMENSIONS
Table size

mm

 800x420
Max. table load

kgs

 250
Net weight kgs 3450 3350 3650 3600
.........................................................................................................................................

NC Specifications
　 Mitsubishi Fanuc
　 E-68 70M-B 70M-A 0i-MD
CPU 64 bit 32 bit
Max. Controlled Axis 4 4 6 4
Max. Simultaneous Axis 4 4 4 4
Program Storage Length 600 M 320 M
Macro Variables Common 400 400 400　 600
Tool Offset Sets 200 200 200　 200
Conversational Programming × ○ ○ ○
Display 8.4" TFT LCD
Mulit-Language Display ○ ○

Servo Motor with ABS. Encoder

 ○ ○

Memory Card　

 ○ ○
Ethernet × ○ ○
High Speed and High Accuracy machining code G05.1 Q1 G05 P10000 G05.1 Q1
RS-232 interfase ○ ○
Program route simulation × ○ ○

Handwheel feed program simulation

× ○ ×
Program buffer correction ○ ×
○ Standard 　　× None 　　OP Option
.........................................................................................................................................

Standard Machine Features
  • Spindle air blow device
  • Work light (PL light)
  • Tool coolant system
  • Leveling bolts and pads
  • Double-cabinet-type heat isolated electric cabinet (with heat exchanger)
  • Screw-type chip removing device
  • Automatic lubrication system
  • Tool kit and tools
  • Dual-color LED alarm light
  • TFT LCD monitor
　
Optional Accessories
  • Automatic door
  • Transformer; regulator
  • 12,000 RPM, 15,000 RPM spindle
  • 20,000 RPM, 24,000 RPM spindle (BT-30 only)
  • Extra low inertia spindel motor
  • High pressure coolant through spindle
  • Automatic tool length measurement with breaking detection
  • Workpiece air blow system
  • 4th axis (NC rotary table)
  • 5th axis (4th axis with tilting shaft)
  • Thermal growth compensation
　 　
..........................................................................................................................
　
Dimensions
  A B C
TR-70E 1850 2520 2800
TR-703 1850 2520 2550
TR-70A 2000 2520 2800
TR-703A 2000 2520 2800
* All specifications, dimensions and design characteristics are subject to change without prior notice.