TAPPING CENTER
  • TR-45 Series
  • TR-51 Series
  • TR-60 Series
  • TR-70 Series
VERTICAL MACHINING CENTER
  • TR-100 Series
VERTICAL MACHINING CENTER WITH AUTOMATIC PLATE CHANGE
  • TR-56S Series
TAPPING CENTER / TR-60 Series
　
　

  • Standard spindle speed 60~8,000 min-1
  • Optional spindle speed 60~12,000, 15,000 min-1
  • Rigid tapping 4,000 min-1
  • Spindle nose taper BT-30, BT-40
  • 3 axes rapid traverse X, Y:48 M/min, Z:48 (60) M/min
  • Fully enclosed heat isolated electric cabinet (with heat exchanger)
  • High speed arm type ATC system T.-T:1.4 sec (BT-30)
  • Directly coupled spindle drive system

.........................................................................................................................................

Machine Specifications

Model

 TR-60 Series
60E 60A 603 603A
TRAVEL
X-Travel mm 600
Y-Travel mm 400
Z-Travel mm 400 500 350 430

Table to Spindle Nose

 shortest 150
TABLE
Table Size mm 700x420
Max. Table kgs 250
T-Slot mm 14x100x4
SPINDLE
Speed rpm 60~8000

Max. Tapping Speed

 rpm 3000 4000
Taper mm 7/24 NO:40 7/24 NO:30
Transmission mm Belt Direct drive
FEED RATE
Rapid Speed G00) M/min 48/48/48 48/48/60

Cutting feedrate (G01)

 mm/min 10000
MAGAZINE　
Tool Shank   BT# 40 BT# 30
Change Method 　 Armless Arm Armless Arm
Capacity 　 12 24+1 12 20+1
Max. Length mm 250 200
Max. Dia. kgs 100 80 80 63
Max. Tool Weight sec 3 4 2.5 3
Time (T to T) sec 1.8 1.8 1.4 1.2
　 sec 2.5 2.6 2.3 2.1
MOTOR
X-Travel kw 1.5
Y-Travel kw 1.5
Z-Travel kw 3.5
Spindle kw 5.5/3.7 7.5/5.5 3.7/2.2
MACHINE SPECIFICATIONS
W x D x H cm 165x252x280 185x252x280 165x252x255 185x252x280
Net Weight

kgs

 3350 3550 3250 3500
.........................................................................................................................................

NC Specifications
　 Mitsubishi Fanuc
　 E-68 70M-B 70M-A 0i-MD
CPU 64 bit 32 bit
Max. Controlled Axis 4 4 6 4
Max. Simultaneous Axis 4 4 4 4
Program Storage Length 600 M 320 M
Macro Variables Common 400 400 400　 600
Tool Offset Sets 200 200 200　 200
Conversational Programming × ○ ○ ○
Display 8.4" TFT LCD
Mulit-Language Display ○ ○

Servo Motor with ABS. Encoder

 ○ ○

Memory Card　

 ○ ○
Ethernet × ○ ○
High Speed and High Accuracy machining code G05.1 Q1 G05 P10000 G05.1 Q1
RS-232 interfase ○ ○
Program route simulation × ○ ○

Handwheel feed program simulation

× ○ ×
Program buffer correction ○ ×
○ Standard 　　× None 　　OP Option
.........................................................................................................................................

Standard Machine Features
  • Spindle air blow device
  • Work light (PL light)
  • Tool coolant system
  • Leveling bolts and pads
  • Double-cabinet-type heat isolated electric cabinet (with heat exchanger)
  • Screw-type chip removing device
  • Automatic lubrication system
  • Tool kit and tools
  • Dual-color LED alarm light
  • TFT LCD monitor
　
Optional Accessories
  • 12,000 RPM spindle
  • 15,000 RPM spindle (except TR-60E)
  • 20,000 RPM spindle (TR-603, TR-603A only)
  • Increased motor power
  • Extra low inertia spindle motor
  • High pressure coolant through spindle (20bar): (except TR-60E)
  • Automatic tool length measurement with breaking detection
  • Automatic door
  • Transformer; regulator
  • Workpiece air blow system
  • 4th axis
  • 5th axis
  • Thermal growth compensation
　 　
..........................................................................................................................
　
Dimensions
　
  A B C
TR-60E 1650 2520 2800
TR-603 1650 2520 2550
TR-60A 1850 2520 2800
TR-603A 1850 2520 2800
* All specifications, dimensions and design characteristics are subject to change without prior notice.