TAPPING CENTER
  • TR-45 Series
  • TR-51 Series
  • TR-60 Series
  • TR-70 Series
VERTICAL MACHINING CENTER
  • TR-100 Series
VERTICAL MACHINING CENTER WITH AUTOMATIC PLATE CHANGE
  • TR-56S Series
VERTICAL MACHINING CENTER / TR-100 Series
　
 
 
　

A Perfect Combination of Precision and Efficiency!
  • The main structural parts are manufactured from high quality Meehanite cast iron, then tempered to relieve internal stress. The structural parts are reinforced by ribs, ensuring superior rigidity of structure and maximum stability during high speed machining.
  • The main structural parts are analyzed by Finite Element Analysis (FEM) and carefully designed to assure outstanding rigidity. Maximum stability is guaranteed during high speed machining.
  • The box ways are processed with heat treatment for exceptional hardness, precisely ground and scraped. The surfaces are coated with Turcite-B for high resistance. All these processes ensure smooth travels
    on the box ways.
  • Three axes employ class C3 precision ball screws for transmission. All ball screws are pretensioned to eliminate backlash problem, while ensuring high feed accuracy and stability.
  • The motor bases and bearing housings on column and saddle are specially designed with one-piece construction. This outstanding feature not only enhances structural rigidity, but also upgrades stability and machining accuracy.
  • The Y-shaped column construction effectively increases rigidity and stability of the machine.
  • The three axes slideways are mounted with precision linear ways that ensure high smoothness of traveling. Also, ideal for high speed machining (for models TR-100A, TR-100E only).
  • Coolant jets around spindle offer outstanding cooling effect on workpiece and cutting tool, effectively preventing workpiece deformation during machining.
  • A laser unit is employed for inspecting positioning accuracy for calibration reference. Inspection is conducted according to Germany VD 3441 standards. In addition, a ball bar tester is also employed for inspecting static and dynamic circularity accuracy, servo error and geometric error.
  • The machine is equipped with a pressure relief oil distributor incorporated with bronze tubes, ensuring the best lubrication performance and long service life.
  • The TR series is available to use directly coupled or built-in type high speed spindle, making the machine ideal for high speed machining and precision machining.
.........................................................................................................................................
Features


DIRECTLY COUPLED SPINDLE

  • Excellent for IT parts machining and precision mold engraving.
  • The spindle features floating locking.
  • The spindle has labyrinth circuit that prevents coolant or other dusts from entering into the spindle, which can result in damage.
  • Integrated tool knocking cylinder allows for considerable time saving in spindle installation and dismantling.
  • Coolant through spindle (optional).

16,000/24,000/30,000 RPM
BUILT-IN TYPE SPINDLE (OPTIONAL)

  • Choice of spindle speeds - 16,000 / 24,000 or 30,000 rpm. 17W, HSK E50. Oil mist lubrication.
  • Compact structure, low power consumption, low thermal displacement.
  • Excellent dynamic rotating accuracy. Minimum vibration.
  • Convenient and quick to install and maintain spindle.
  • High efficiency internal circulated cooling feature assures long service life of bearings.
  • High machining efficiency and increased product value.
  • Reduced spindle rotating inertia that minimizes spindle vibration.

COOLANT JETS AROUND SPINDLE
The coolant jets around spindle are designed to solve interference problem in the cutting area caused by conventional nozzles. It also may upgrade cooling effect for the workpiece.

SYMMETRICAL SPINDLE HEAD LAYOUT
The spindle head layout is completely symmetrical, eliminating the spindle head tilting problem during machining. Another benefit is to prevent instability caused by heat transfer from the spindle motor.
ONE-PIECE CONSTRUCTED
SCREW SUPPORT
The motor base bearing housing and the structural part are specially designed with one-piece construction. This results in greater rigidity and stability of feed transmission.
BEAUTIFIED MACHINE BACK
MORE NEAT! MORE BEAUTIFUL!
All piping located at the machine back is concealed in the enclosure making the machine's back look neat and beautiful. In addition, it also prevents piping form being damaged due to outside exposure, while providing added convenience of machine maintenance.
24 TOOLS
ARM TYPE MAGAZINE
The magazine loading capacity is 24 tools.
Bi-directional, random tool selection.
24 TOOLS
ARMLESS TYPE MAGAZINE
The magazine loading capacity is 24 tools.
Bi-directional, random tool selection.
   
.........................................................................................................................................

Machine Specifications

Model

 TR-100 Series
100A 100E 100AB 100EB
TRAVEL
X-Travel mm 1100 1050
Y-Travel mm 550 600
Z-Travel mm 550 550

Table to Spindle Nose

 mm 170~720 160~710
Spindle center to column slide face mm 680 610
GUIDEWAY
Slide way type   Linear way Box way
X - axis guideway span / width mm 325 / #35 415
Y - axis guideway span / width mm 650 / #35 790
Z - axis guideway span / width mm 412 / #45 540
TABLE
Table area mm 1200x550
T-slot mm 18x4x125
Max. load kgs 600
SPINDLE
Spindle Speed rpm 60-8000

Transmission

   Direct drive
Spindle Taper   7/ 24 NO:40
FEED RATE
Rapid traverse M/min 36/36/30 24/24/18
Cutting feedrate M/min 1~10
MAGAZINE
Magazine type   Arm Armless Arm Armless
Tool shank   BT#40
Tool capacity pcs 24
Tool weight kgs 7
Max. tool length mm 250
Max. tool diameter mm 80
MOTOR
X / Y / Z - axis servo motor kw 2/2/3
Spindle motor kw 11/7.5
MACHINE SPECIFICATIONS
W x D x H mm 2800 x 2470 x 2900
Net Weight

kgs

 6200 6100 6300 6100
.........................................................................................................................................

NC Specifications
　 Mitsubishi Fanuc
　 70M-B 70M-A 0i-MD
CPU 64 bit 32 bit
Max. Controlled Axis 4 6 5
Max. Simultaneous Axis 4 4 4
Program Storage Length 600 M 320 M
Macro Variables Common 400 400　 600
Tool Offset Sets 200 200　 200
Conversational Programming ○ ○ ○
Display 8.4" TFT LCD
Mulit-Language Display ○ ○

Servo Motor with ABS. Encoder

 ○ ○

Memory Card　

 ○ ○
Ethernet ○ ○
High Speed and High Accuracy machining code G05.1 Q1 G05 P10000 G05.1 Q1
RS-232 interfase ○ ○
Program route simulation ○ ○

Handwheel feed program simulation

○ ×
Program buffer correction ○ ×
○ Standard 　　× None 　　OP Option

Standard Machine Features
  • Fully enclosed guard
  • Double layer fully enclosed electric cabinet with heat exchanger
  • Spindle air blow device
  • Dual color LED alarm light
  • Dual PL work light
  • Tool kits
  • Movable control box
  • Screw-type chip conveyor
  • Floor flush device.
　
Optional Accessories
  • Spindle speed 10,000 / 12,000 / 15,000 rpm
  • 4th / 5th axis
  • Automatic tool length measurement with breakage detection
  • Automatic door
  • Coolant through spindle (20BAR)
  • CAT / DIN tool shank
  • Thermal compensation
　 　
* All specifications, dimensions and design characteristics are subject to change without prior notice.